| Artikel | Details |
|---|---|
| Projektname | Projekt Kommunales Abwasser-UF-System |
| Standort | Philippinen |
| Jahr | May 2017 |
| Anmeldung | Kommunale Abwasserbehandlung |
| UF Production Capacity | 68,000m³/d / 2,833m³/h |
| System Quantity | 12 UF units |
| Capacity per Unit | 240m³/h |
| UF Recovery Rate | 90% |
| Single Unit Size | 7m × 3m × 3.3m |
| Process Role | UF pretreatment before RO |
This project was designed for a large municipal domestic wastewater treatment application. The incoming water quality was relatively stable, with BOD < 20mg/L and SS < 30mg/L. After UF treatment, the water was required to meet RO feed water conditions.
The UF system was designed as the key membrane filtration section of the project. The pretreatment before UF and the advanced treatment after UF were handled by the project contractor, while the UF section was designed to provide stable filtration performance before the RO stage.
The system includes 12 UF units, each with a production capacity of 240m³/h. The total UF output reaches 68,000m³/d, with a UF recovery rate of 90%.
Raw Water Tank → Raw Water Pump → Pretreatment → UF System → UF Water Tank
Eine kommunale Kläranlage in Turkmenistan modernisierte ihr bestehendes MBR-System durch den Austausch alter Membranvorhänge. Insgesamt wurden 5 Chargen von MBR-Membranen geliefert und erfolgreich in Betrieb genommen, was zu einer stabilen Systemleistung beiträgt.
Bei einem Projekt zur Behandlung pharmazeutischer Abwässer in Thailand wurde ein biologisches MBBR-Verfahren eingesetzt. Das System behandelt 40 m³/Tag Abwasser und unterstützt eine stabile Einleitung gemäß den Projektanforderungen.
